Device Mounting Adapter for Volvo XC90 02-14 (RHD)

Please read all of the instructions and look at the pictures before installation. 
1. Remove the original Duo Cinema mount from the Nextbase headrest mount by loosening the six screws. Place the mounting adapter plate onto the back of the Duo Cinema mount and screw it into place with four of the removed screws.
2. Loosen the screw in the center of the mounting adapter so you can remove the attaching plate on the back. Place the attaching plate onto the Brodit headrest mount. Screw the attaching plate into place with the enclosed screws. Place the mounting adapter onto the attaching plate so the tilt swivel fits. Tighten the screw so the mounting adapter is firmly in place, but still can be adjusted/angled. 
3. The headrest mount parts are to be installed the way that is shown the picture. Place the back part of the headrest mount onto the front side of the headrest. Press it toward you, into the gap between the seat's headrest and back support. Place the mounting plate onto the back part of the headrest mount so the screws match the holes. Tighten the two screws using the enclosed tool so the headrest mount is firmly in place. The headrest mount is in place.
4. To attach the mounting adapter onto the screen: Place the mounting adapter with the Duo Cinema mount on the back side of the screen ant press it sideways into place.
To attach the screen onto the headrest mount: Place the screen above the mounting adapter on the headrest mount. Press the screen straight downward so it attaches properly onto the mounting adapter.
To remove the screen: Press the screen straight upward, away from the mounting adapter.