ONLY for device in folded position (not unfolded).
Keep your device in a holder; firmly in place and easy accessible while driving! Safe, efficient and convenient! The holder is customized with a perfect fit for bare device (not for case). You have full access to the camera, buttons and ports while in use. Easy one-hand insertion and removal.
For use with device in folded position (not unfolded).
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. With 4 mm AMPS standard holes for easy attachment onto a ProClip mounting platform. Mounting plate 42x50 mm. Color: black. Made of hhigh grade Acetal and ABS plastic. Made in Sweden
Please read all of the instructions and look at the pictures before attaching the holder.
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.
3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place. Tighten the screw so the holder is firmly in place, but still can be adjusted.
4. The holder is in place.
Also Suitable for:
Shop safely and securely
