skip to main content
£0.00
0
Active holder with USB-cable and cig-plug adapter for Panasonic FZ-L1
Active holder with USB-cable and cig-plug adapter for Panasonic FZ-L1
Active holder with USB-cable and cig-plug adapter for Panasonic FZ-L1
Active holder with USB-cable and cig-plug adapter for Panasonic FZ-L1
Active holder with USB-cable and cig-plug adapter for Panasonic FZ-L1
 Active holder with USB-cable and cig-plug adapter for Panasonic FZ-L1
Active holder with USB-cable and cig-plug adapter for Panasonic FZ-L1
Active holder with USB-cable and cig-plug adapter for Panasonic FZ-L1
Active holder with USB-cable and cig-plug adapter for Panasonic FZ-L1
Active holder with USB-cable and cig-plug adapter for Panasonic FZ-L1

Active holder with USB-cable and cig-plug adapter for Panasonic FZ-L1

With USB-cable with cig-plug adapter. With tilt swivel.

£94.99 incl VAT

Product Code: 721101

Special order item, lead time from manufacturer is 7-10 working days.

Active holder with a USB-cable with cig-plug adapter for charging of your device. You can choose to connect the cig-plug to the car's 12 Volt socket, or to remove the cig-plug adapter and connect the USB cable to the car's USB connector. Equipped with a tilt swivel so you can adjust the angle and easily switch between portrait and landscape mode. 12V.  
   
Tablets should not be installed onto a car’s dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices e.g. smartphones, not large tablets. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.  
   
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.

Please read all of the instructions and  look at the pictures before attaching the holder.
 
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.
 
2. To place the device in the holder: Place the lower part of the device in the holder, then flip/press the upper part forwards so it snaps into place in the holder.

3. To remove the device from the holder: Press upwards on the upper part of the holder, in the same time pull the upper part of the device out from the holder and then lift the device up and out from the holder.

4. The holder is in place.

Active holder with USB-cable and cig-plug adapter for Panasonic FZ-L1 Active holder with USB-cable and cig-plug adapter for Panasonic FZ-L1 Active holder with USB-cable and cig-plug adapter for Panasonic FZ-L1 Active holder with USB-cable and cig-plug adapter for Panasonic FZ-L1

Also Suitable for:

Item added to basket