With tilt swivel. 2 keys included.
This holder is to be used when you want to secure your Ingenico 5000 and still have it easy accessable. The holder is also perfect for use in stores, at exhibitions and any place where you want to use your Ingenico 5000 without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the unit from the holder you need the key, two keys are included.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or an ProClip mounting platform.
Please read all of the instructions and look at the pictures before attaching the holder.
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw so the holder is firmly in place, but still can be adjusted.
3. Slide the device carefully downward into the holder. Press the lock downward onto the upper part of the holder. Press the button to lock. Use the enclosed key to open the lock. Remove the lock by pressing it upward away from the holder. Lift the device carefully upward out of the holder.
4. The holder is in place.
Also Suitable for:
Shop safely and securely
