For device with/without handstrap.
Keep your device in a holder for safer driving when viewing, accessing and operating your device in your vehicle. Neat, discreet and convenient! Keeps your device in an upright position for better reception. Custom made design with a perfect, firm fit with/without handstrap. You have full access to the camera and all buttons and outlets when the device is in the holder. You can connect a charging cable to the device when it is in the holder. Easy dock/undock your device with one hand.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS plastic. Color: black. Made in Sweden. For easy and optimal installation, attach the holder onto a custom ProClip Vehicle Mount, a Pedestal Mount or attach it directly to any surface.
Please read all of the instructions and look at the pictures before attaching the holder.
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.
3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place. Tighten the screw so the holder is firmly in place, but still can be adjusted.
4. The holder is in place.
Shop safely and securely
