Extra strength holder. For device with Integrated Scanner. With AMPS, Vesa 75/100 holes.
This holder is the perfect choice when you want to have your device within reasy reach. Custom fit for devices with Integrated 1D/2D barcode Scanner. (ET51AE-W12E-SF, ET51AE-W15E-SF, ET51CE-G21E-SFA6, ET51CE-G21E-SFNA) The holder has an extra robust design. Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. Predrilled AMPS and VESA 75/100 standard holes. You have full access to the camera and all buttons and outlets when the device is in the holder.
Made in Sweden. Made of high grade Acetal plastic. Color: Black. Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done on the customer's own responsibility.
Please read all of the instructions and look at the pictures before attaching the holder.
1. Place the holder onto the desired position and screw into place with the enclosed screws.
2. To place the device in the holder: Place the lower part of the device in the holder. Flip/press the upper part of the device forward so it snaps into place in the holder.
3. To remove the device from the holder: Press upwards on the upper part of the holder, at the same time pull the upper part of the device out from the holder. Lift the device up and out from the holder.
4. The holder is in place.
Also Suitable for:
Shop safely and securely
