The headrest mount is car specific and serves as a mounting platform. Onto the headrest mount you can attach any holder of your choice, e.g. for a surfpad or a multimedia monitor. Example: If you are installing a surfpad in the car you will need two parts; the correct headrest mount (specific for your car) and the correct holder (specific for your surfpad).
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The headrest mount faceplate has predrilled holes which makes the attachment of a holder easier.
Holders that can be installed onto the headrest mount can be found easily in the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some surfpad holders are crashtested and approved for use on Brodit's headrest mounts (look for crash test labeling).
Please read all of the instructions and look at the pictures before attaching the headrest mount.
1. Press the thin edge on the upper part of the mount carefully upward into the gap in the headrest.
2. Place the thin edge on the lower part of the mount into the gap in the backrest.
3. Carefully turn the nut and make sure that the mount is properly in place in the gaps as the mount expands. Turn the nut until the mount presses upward and downward and is firmly in place. Use the enclosed tool to lock the mount into the correct position.
4. The headrest mount is in place.
Also Suitable for:
Shop safely and securely
