skip to main content

Brodit 2 part solution

Home > Brodit Step 2 > Ford > Transit > 2020 > Proclip Mounts > ProClip Center mount

ProClip view larger image

ProClip Center mount for Ford Transit 20-21

For Ford Transit 20-21 in all countries. Right Hand Drive. (Item # 655499)


On Order: 3 | Click to check lead time

Awaiting delivery, 3 currently in transit from manufacturer.
More available to order with a lead time of 7-10 working days.

A bulk discount could be offered on any business order of 25+ pieces. For more details contact us.

Keep your device within easy sight and reach in your car! The ProClip makes it easier and safer to use handheld devices in vehicles. The ProClip is a mounting bracket that you attach to the dashboard of your car. Onto the ProClip, you can install any accessory, e.g. a holder for mobile phone or other communication device.

The ProClip is car specific, it is customized for each car model and has a perfect fit. The ProClip offers a firm mounting platform and is available in multiple positions for most vehicles. Discreet design that blends in well with the interior. Safe, neat and convenient!

The ProClip is easy to install, you can do it in a minute! You simply snap the ProClip into place in gaps in the interior, you do not need to drill holes or use special tools or dismantle the dashboard. Detailed mounting instructions included. The ProClip has AMPS holes for easy installation of a holder. Made of high grade ABS/Acetal plastic. Color: Black. Developed and produced in Sweden.

- Do you want to be able to switch between several holders on the same ProClip? Please see Broditís MultiMoveClip.
- Are you installing larger devices or heavier equipment? Please see Broditís Extra Strength Mounting Platforms and Pedestal Mounts

Also Suitable for:
For Ford Tourneo Custom in all countries.
For Ford Transit in all countries.

Installation Instructions

Please read all of the instructions and look at the pictures before attaching the ProClip.
This ProClip consists of two parts:
Part 1. Attaching part (the smallest part)
Part 2. ProClip face plate

1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Press the thin end of the enclosed gap opener into the gap between the control panel and the dashboard overhang, to widen the gap. Press the angled edge of Part 1 into the gap next to the gap opener. Press Part 1 upward and forward so the angled edge hooks behind the control panel. Pull out the gap opener.

2. Peel off the adhesive tape cover on Part 2. Hold Part 1 in the correct position, press it upward. At the same time, place Part 2 over the holes in Part 1 so the holes match.

3. Hold part 1 in the correct position, press it upward. At the same time, attach Part 2 onto Part 1 with the enclosed screws.

4. The ProClip is in place.

ProClip ProClip ProClip ProClip