skip to main content

STATEMENT REGARDING COVID-19 - FAST SHIPPING STILL AVAILABLE

Brodit 2 part solution

Home > Brodit Step 1 > Samsung > Galaxy Xcover 4 > Holders > Active holder with cig-plug

Active holder with cig-plug view larger image

Active holder with cig-plug for Samsung Galaxy Xcover 4

With tilt swivel.

For Samsung Galaxy Xcover 4 in all countries. (Item # 512958)

£45.99

Special order item, lead time from manufacturer is 7-10 working days.

A bulk discount could be offered on any business order of 25+ pieces. For more details contact us.

Keep your phone's battery fully charged in an active holder, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. With cig-plug cable, 2A charging via the Micro-USB connector. You can charge a second device via the USB A outlet in the cig-plug, 1A charging. You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the phone in place in the holder so it connects to the charging, and to take it out of the holder when leaving the vehicle. Fits only devices without the included back cover on.

The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20 and swivels 360. Mounting plate 42x50 mm with predrilled AMPS-holes +2x3,5 mm centered holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto ProClip Mounting Platform.

Dimensions: 79 x 102 x 50 mm (W x H x D mm)
Weight: 139 g
Cable length (+plug 76 mm): 58 cm, stretched:80 cm (or a bit more if needed).

Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.25V
Output current(Typ): 2.0A
LED charging indicator: Power on.
Operating temperature: 0C ~ +40C
Storage temperature: -20C ~ +60C
Approvals: E, CE, FCC, ROHS


Also Suitable for:
For Samsung Galaxy Xcover 4 in all countries.


Installation Instructions

Please read all of the instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.

3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place. Tighten the screw firm at first, then loosen it a bit so the holder is firmly in place, but still can be adjusted.

4. The holder is in place.

Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug