skip to main content

Brodit 2 part solution

Home > Car Phone Holder > Samsung > Galaxy Tab Active 3 SM-T570/SM-T575 > Holders > Passive holder with tilt swivel

Passive holder with tilt swivel view larger image

Passive holder with tilt swivel for Samsung Galaxy Tab Active 3 SM-T570/SM-T575

Fits for devices with original skin. <br> 

For Samsung Galaxy Tab Active 3 SM-T570/SM-T575 in all countries. (Item # 711002)

£54.99 inc. VAT

In Stock: 2 | Click to check lead time

2 available from our UK warehouse, order before 15:30 Mon-Fri for same day despatch (excluding holidays).
2 on order currently in transit from manufacturer.
More available to order with a lead time of 7-10 working days.

A bulk discount could be offered on any business order of 25+ pieces. For more details contact us.

With your tablet in a holder attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the device when it is in the holder.
 
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the device into place in the holder, and to take it with you when leaving the car.
 
Attach the tablet holder onto a Brodit headrest mount, pedestal mount or high strength mounting platform.
When choosing the location for the holder, it is important to make sure that the installation does not block the view or interfere with functions or controls.


Also Suitable for:
For Samsung Galaxy Tab Active 2 SM-T390/SM-T395 in all countries.
For Samsung Galaxy Tab Active 3 SM-T570/SM-T575 in all countries.


Installation Instructions

Please read all of the instructions and  look at the pictures before attaching the holder.
 
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
 
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.
 
3. To place the device in the holder: Place the lower part of the device into the holder where the opening between the sidewalls is widest. Flip the upper part of the device forward so the device goes flat into the holder. Slide the device straight downward into the holder.
To remove the device from the holder: Press the device straight upward so the lower part reaches the widest part of the opening between the sidewalls. Flip the upper part of the device away from the holder and lift the device out from the holder.
 
4. The holder is in place.

Passive holder with tilt swivel Passive holder with tilt swivel Passive holder with tilt swivel Passive holder with tilt swivel