skip to main content

Brodit 2 part solution

Home > Car Phone Holder > Samsung > Galaxy Tab A 10.1 (2016) SM-T580/SM-T585 > Holders > Active holder with cig-plug

Active holder with cig-plug view larger image

Active holder with cig-plug for Samsung Galaxy Tab A 10.1 (2016) SM-T580/SM-T585

With cig-plug adapter. With tilt swivel. 2,1A charging. 12/24V.

For Samsung Galaxy Tab A 10.1 (2016) SM-T580/SM-T585 in all countries. (Item # 521919)

£69.99 inc. VAT

Special order item, lead time from manufacturer is 7-10 working days.

A bulk discount could be offered on any business order of 25+ pieces. For more details contact us.

Use an active holder for your Galaxy Tab A 10.1 while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation -safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the Galaxy Tab A 10.1 into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a carís dashboard if they block the view or block key controls. ProClip (Broditís vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the carís dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicleís dashboard is always done on the customerís own responsibility. Brodit recommends to use tablets on the carís headrest, installed onto a Brodit headrest mount.

Dimensions: 175 x 250 x 42 mm (W x H x D mm)
Weight: 295 g
Cable length (+connector with plug 85 mm): 145 cm

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).


Also Suitable for:
For Samsung Galaxy Tab A 10.1 (2016) SM-T580/SM-T585 in all countries.


Installation Instructions

Please read all of the instructions and †look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.

3. Slide the device sideways into the holder.

4. The holder is in place.

Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug