skip to main content

Find your Brodit

Home > Brodit Step 1 > Samsung > Galaxy S8 > Holders > Tough Sleeve

Tough Sleeve view larger image

Tough Sleeve for Samsung Galaxy S8

With USB-cable with cig-plug adapter. With active MultiMoveClip. 12/24V. With tilt swivel.

For Samsung Galaxy S8 in all countries. (Item # 558989)

Brodit special order product, please contact us for details.

The choice for you who use your device every day in a rough environment! Your device is protected in a tough sleeve, in the same time as it gets charged. You can easily take the device with you and move it between vehicle-vehicle or vehicle-office.
 
First you place your device in the tough sleeve, which is a slimmed version of a rubost case/jacket with built in bumpers (the Heavy Duty Tough Sleeve). The bumpers help to protect the device in case of minor bumps and drops. Then you attach the sleeve onto an active MultiMoveClip by pressing it downward onto the mount. When it snaps into place, the charging is automatically connected via the Sliding Power Block. Thanks to the quick connector, you also remove the sleeve from the MultiMoveClip in an instant. The charging connector is durable to withstand frequent wear in everyday professional use.
 
The device is firmly in place in the sleeve and can not be removed without loosening the screws. You have full access to the camera and all buttons when the device is in the sleeve. With USB cable with cig-plug adapter. 12/24V. Equipped with a tilt swivel so you can easily switch between portrait and landscape mode.  Made of black ABS- och Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or extra strength mounting platform. 
 
Sleeve Dimensions: 178 x 90 x 23 mm (W x H x D mm). Weight: 246 g
MultiMoveClip with Sliding Power block with USB-cable with cig-plug adapter: Builds 35 mm to the sleeve depth and 21 mm to the height. Cable length 102 cm + 58 mm cig-plug adapter. Weight 131 g.
 


Also Suitable for:
For Samsung Galaxy S8 in all countries.


Installation Instructions

Please read all of the instructions and look at the pictures before installing.
1. To place the device in the sleeve: Place the device onto the backpart of the sleeve. Carefully connect the charging connector to the device. NOTE: It is very important to hold the connector straight in front of the device and connect it straight into the device (if you angle the connector/place it askew into the device, you risk to damage the connector/device). Place the front part/frame over the device and attach it by screwing the enclosed screws into place on the back side of the sleeve. Place the short screw in the position shown in the picture and the long screws into the other predrilled holes. The device is now securely in place and can not be removed without loosening the screws. 2. To install the active MultiMoveClip: Loosen the screw in the center of the Power Block so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position and screw it into place with the enclosed screws. Place the Power Block over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the MultiMoveClip is firmly in place, but still can be adjusted. 3. To place the sleeve onto the active MultiMoveClip: Place the sleeve above the Power Block and slide/press it straight downward into the Power Block so you hear/feel it snaps into place. The device is now connected to the charging. To remove the sleeve from the active MultiMoveClip: Press forward on the release arm on the Power Block so the sleeve is set free. Press/lift the sleeve straight upward, out from the Power Block. 4. The product is in place.

Tough Sleeve Tough Sleeve Tough Sleeve Tough Sleeve