skip to main content

Brodit 2 part solution

Home > Car Phone Holder > Samsung > Galaxy S6 edge > Holders > Active holder with USB-cable and cig-plug adapter

Active holder with USB-cable and cig-plug adapter view larger image

Active holder with USB-cable and cig-plug adapter for Samsung Galaxy S6 edge

With tilt swivel. With USB cable. Fits for devices with skin; adjustable top.

For Samsung Galaxy S6 edge in all countries. (Item # 521724)

£99.99 inc. VAT

In Stock: 1 | Click to check lead time

1 available from our UK warehouse, order before 15:30 Mon-Fri for same day despatch (excluding holidays).
1 on order currently in transit from manufacturer.
More available to order with a lead time of 7-10 working days.

A bulk discount could be offered on any business order of 25+ pieces. For more details contact us.

The active holder charges your phone when it is in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
 
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12 Volt. Fits for devices with skin. The top part of the holder is adjustable and adapts to the height of your phone. Attach onto a ProClip Mounting Platform.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).


Also Suitable for:
For Samsung Galaxy S6 in all countries.
For Samsung Galaxy S6 edge in all countries.
For Samsung Galaxy S7 in all countries.


Installation Instructions

Please read all of the instructions and  look at the pictures before attaching the holder.
 
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
 
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.
 
3. To place the device in the holder: Place the upper part of the device in the holder, then press the device forwards and upwards so it snaps into place in the holder. To remove the device from the holder: Press upwards on the lower part of the device, in the same time pull the the device out and down from the holder.
 
4. The holder is in place.

Active holder with USB-cable and cig-plug adapter Active holder with USB-cable and cig-plug adapter Active holder with USB-cable and cig-plug adapter Active holder with USB-cable and cig-plug adapter