skip to main content

Brodit 2 part solution

Home > Brodit Step 1 > Samsung > Galaxy S4 GT-I9505 > Holders > Active holder with cig-plug

Active holder with cig-plug view larger image

Active holder with cig-plug for Samsung Galaxy S4 GT-I9505

With tilt swivel. Fits for devices with skin.

For Samsung Galaxy S4 GT-I9505 in all countries. (Item # 512409)

£87.99 inc. VAT

Special order item, lead time from manufacturer is 7-10 working days.

A bulk discount could be offered on any business order of 25+ pieces. For more details contact us.

The active holder charges your phone when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. Passar enhet med skin. Attach onto a ProClip Mounting Platform.


Also Suitable for:
For Samsung Galaxy S III (AT&T SGH-i747) in USA.
For Samsung Galaxy S III (Sprint SPH-L710) in USA.
For Samsung Galaxy S III (T-Mobile USA SGH-T999) in USA.
For Samsung Galaxy S III (Verizon SCH-i535) in USA.
For Samsung Galaxy S III i9300 in Europe.
For Samsung Galaxy S III i9305 in all countries.
For Samsung Galaxy S4 GT-I9505 in all countries.
For Samsung Galaxy S4 GT-I9506 in all countries.


Installation Instructions

Please read all of the instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.

3. To place the device in the holder: Place the upper part of the device in the holder, then press the device forwards and upwards so it snaps into place in the holder. To remove the device from the holder: Press upwards on the lower part of the device, in the same time pull the the device out and down from the holder.

4. The holder is in place.

Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug