skip to main content

Brodit 2 part solution

Home > Car Phone Holder > Panasonic > FZ-M1 > Holders > Holder with lock.

Holder with lock. view larger image

Holder with lock. for Panasonic FZ-M1

Passive holder with tilt swivel. 2 keys included. Fits unit both with and without handstrap.

For Panasonic FZ-M1 in all countries. (Item # 539768)

£99.99 inc. VAT

Special order item, lead time from manufacturer is 7-10 working days.

A bulk discount could be offered on any business order of 25+ pieces. For more details contact us.

This holder is to be used when you want to secure your device and still have it easy accessable.
The holder is also perfect for use in stores, at exhibitions and any place where you want to use your Panasonic without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the Panasonic from the holder you need the key, two keys are included. Fits units both with and without handstrap.

Also Suitable for:
For Panasonic FZ-B2 in all countries.
For Panasonic FZ-M1 in all countries.

Installation Instructions

Please read all of the instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw the holder onto the attaching plate. Tighten the screw so the holder is firmly in place, but still can be adjusted.

2. To place the device in the holder: Place the lower part of the device in the holder, then flip/press the upper part forwards so it snaps into place in the holder. Push the lock downwards and turn the key to lock the unit into the holder.

3. To remove the device from the holder: Use the enclosed key to open the lock. Slide the locks upwards. Press upwards on the upper part of the holder, in the same time pull the upper part of the device out from the holder and then lift the device up and out from the holder.

4. The holder is in place.

Holder with lock. Holder with lock. Holder with lock. Holder with lock.