skip to main content

BLACK FRIDAY - 20% DISCOUNT ON ALL PRODUCTS

Brodit 2 part solution

Home > Brodit Step 1 > Honeywell > CT50 > Holders > Active holder with cig-plug

Active holder with cig-plug view larger image

Active holder with cig-plug for Honeywell CT50

With tilt swivel.

For Honeywell CT50 in all countries. (Item # 512805)

£63.99 inc. VAT
(Black Friday Sale - Was £79.99)

Special order item, lead time from manufacturer is 7-10 working days.

Black Friday Sale - Prices already discounted!

A bulk discount could be offered on any business order of 25+ pieces. For more details contact us.

The active holder charges your battery when it is in the holder. The charging device connects to the device automatically when you put it in the holder. Connects to the vehicle's cigarette lighter socket, 12/24 Volt.

The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or an ProClip mounting platform.


Also Suitable for:
For Honeywell CT50 in all countries.
For Honeywell CT60 in all countries.


Installation Instructions

Please read all of the instructions and  look at the pictures before attaching the holder.
 
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
 
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw so the holder is firmly in place, but still can be adjusted.
 
3. To place the device in the holder: Place the lower part of the device in the bottom of the holder. Flip/Press the top of the device forward into place in the holder.
To remove the device from the holder: Press the upper part of the holder upward/forward, at the same time pull the upper part of the device out from the holder. When the device is set free, lift it upward out of the holder.
 
4. The holder is in place.

Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug