skip to main content

Brodit 2 part solution

Home > Brodit Step 1 > HTC > One XL > Holders > Active holder with cig-plug

Active holder with cig-plug view larger image

Active holder with cig-plug for HTC One XL

With tilt swivel.

For HTC One XL in Australia. (Item # 512397)

£45.99 inc. VAT

Special order item, lead time from manufacturer is 7-10 working days.

A bulk discount could be offered on any business order of 25+ pieces. For more details contact us.

The active holder charges your HTC when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.


Also Suitable for:
For HTC One X AT&T in all countries.
For HTC One XL in Australia.


Installation Instructions

Please, carefully read all instructions and review the pictures before attaching the holder.

1. Unscrew the screw in the center of the holder. Remove the holder from the tilt swivel base plate. Place the base plate onto the desired position. Screw the base plate into place by using the enclosed screws.

2. Start to thread the center screw into the base plate. When you connect with the nut, pull the holder towards you to prevent the nut from spinning around. Tighten the screw firmly. Then loosen the screw sligthly for easier angling/rotation of the holder.

3. Slide the device into the holder. To remove the device from the holder, slide it out. Use the tilt swivel to adjust the angle.

4. The holder is in place.

Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug