skip to main content

Find your Brodit

Home > Brodit Step 1 > Getac > F110 > Holders > Passive holder

Passive holder view larger image

Passive holder for Getac F110

For Getac F110 in all countries. (Item # 510813)

£69.99 inc. VAT

Special order item, lead time from manufacturer is 7-10 working days.

Please note we are experiencing extended delivery times on special order items during the summer holiday period.

A bulk discount could be offered on any business order of 25+ pieces. For more details contact us.

With your surfpad in a holder attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the surfpad when it is in the holder.

It is easy to put the surfpad into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a carís dashboard if they block the view or block key controls. ProClip (Broditís vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the carís dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicleís dashboard is always done on the customerís own responsibility. Brodit recommends to use tablets on the carís headrest, installed onto a Brodit headrest mount.


Also Suitable for:
For Getac F110 in all countries.


Installation Instructions

Please read all of the instructions and †look at the pictures before attaching the holder.

1. Place the holder onto the desired position. Screw the holder into place.

2. To place the device in the holder: Place the lower part of the device in the holder, then flip/press the upper part forwards so it snaps into place in the holder.

3. To remove the device from the holder: Press upwards on the upper part of the holder, in the same time pull the upper part of the device out from the holder and then lift the device up and out from the holder.

4. The holder is in place.

Passive holder Passive holder Passive holder Passive holder