skip to main content

Brodit 2 part solution

Home > Brodit Step 1 > Garmin > Street Pilot 2820 > Holders > Passive holder with tilt swivel

Passive holder with tilt swivel view larger image

Passive holder with tilt swivel for Garmin Street Pilot 2820

For Garmin Street Pilot 2820 in all countries. (Item # 215001)

£25.99 inc. VAT

Special order item, lead time from manufacturer is 7-10 working days.

A bulk discount could be offered on any business order of 25+ pieces. For more details contact us.

More and more people use navigation units. Keep your unit in a holder attached to the dashboard, and you will always have it within easy reach! You can easily take the unit with you when leaving the vehicle. The holders can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.


Also Suitable for:
For Garmin Street Pilot 2610 in all countries.
For Garmin Street Pilot 2620 in all countries.
For Garmin Street Pilot 2650 in all countries.
For Garmin Street Pilot 2720 in all countries.
For Garmin Street Pilot 2820 in all countries.


Installation Instructions

Please read all of the instructions and look at the pictures before the installation.
You can install this holder either onto a vertical or a horizontal surface.
1. Installation on vertical surface: Loosen the screw in the tilt swivel plate so you get two parts. Place the tilt swivel face plate on the back of the holder, so the holes match. Note that the screw and washer are to be between the tilt swivel face plate and the holder. Screw the tilt swivel face plate onto the back of the holder with the enclosed screws.
2. Installation on horizontal surface: Loosen the screw in the tilt swivel plate so you get two parts. Place the tilt swivel face plate under the holder, so the holes match. Note that the screw and washer are to be between the tilt swivel face plate and the holder. Screw the tilt swivel face plate onto the bottom of the holder with the enclosed screws.
The pictures show installation of a holder onto a vertical surface. For installation onto a horizontal surface, the same procedure applies, only the placement of the tilt swivel varies.
3. Place the tilt swivel mounting plate onto desired position. Screw it into place with the enclosed screws. Place the holder over the tilt swivel mounting plate so the tilt swivel fits. Screw the holder into place. The holder is in place.
4. To place the unit in the holder: Press the unit upwards into the holder, towards the upper part of the holder. Press the lower part of the unit forwards, into the holder until you hear/feel it snaps into place. To take the unit out of the holder: Press the lower part of the holder downwards and press the lower part of the unit away from the holder, up and out. Lift the unit downwards and out of the holder.

Passive holder with tilt swivel Passive holder with tilt swivel Passive holder with tilt swivel Passive holder with tilt swivel