skip to main content

Brodit 2 part solution

Home > Brodit Step 1 > Garmin > Fleet 780 > Holders > Holder with lock.

Holder with lock. view larger image

Holder with lock. for Garmin Fleet 780

With tilt swivel. 2 keys included.

For Garmin Fleet 780 in all countries. (Item # 215999)

£129.99 inc. VAT

Special order item, lead time from manufacturer is 7-10 working days.

A bulk discount could be offered on any business order of 25+ pieces. For more details contact us.

Do you prefer to have your Garmin device firmly in place within easy reach while driving, instead of trying to reach for it in a suction cup mount on the windshield? Brodit holders provide a firm installation of your device within easy reach and sight in your car. Neat, discreet and convenient. And the holder is equipped with a lock, you can lock your Garmin into place in the holder so it is not easily removed. The holder is custom made with a perfect, firm fit. It is to be used with the original magnetic mount that is included when you buy the device.
 
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with AMPS-holes. Made of high grade ABS/Acetal plastic. Color: black. Made in Sweden. Attach onto ProClip Mounting Platform or a Pedestal Mount.


Also Suitable for:
For Garmin dezl 780 LMT-D in all countries.
For Garmin dezlCam 785 LMT-D in all countries.
For Garmin Fleet 770 in all countries.
For Garmin Fleet 780 in all countries.
For Garmin Fleet 790 in all countries.


Installation Instructions

Please read all of the instructions and  look at the pictures before attaching the holder.
 
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw the holder onto the attaching plate. Tighten the screw so the holder is firmly in place, but still can be adjusted.
 
2.                                                   To place the device in the holder: Place the lower part of the device in the dock, then flip/press the upper part forwards so it snaps into place in the holder. Push the lock downwards and press the button on its side to lock the unit into the holder.
 
3. To remove the device from the holder: Use the enclosed key to open the lock. Slide the lock upwards. Release the device from the dock by pressing the button on the top side of the dock, in the same time pull the upper part of the device out from the dock and then lift the device up and out from the holder.
 
4. The holder is in place.

Holder with lock. Holder with lock. Holder with lock. Holder with lock.