skip to main content

Find your Brodit

Home > Brodit Step 1 > EF Johnson > 5100 ES-series > Holders > Active holder with cig-plug

Active holder with cig-plug view larger image

Active holder with cig-plug for EF Johnson 5100 ES-series

For use with NiMH, Li-Ion or Li-Poly batteries.

For EF Johnson 5100 ES-series in all countries. (Item # 512017)

£89.99 inc. VAT

Special order item, lead time from manufacturer is 7-10 working days.

A bulk discount could be offered on any business order of 25+ pieces. For more details contact us.

The Vehicle Charging Cradle is custom made for a perfect fit. The cradle holds a two-way radio in an upright position for better reception. Each has a cigarette lighter charging cord permanently attached to the cradle with built in contact points for the battery. Utilizing a Delta-V charging technique, the cradle provides rapid and trickle charging. Each cradle has a number of features such as a security timer, overheat sensor, and LED indicator to show that charging is in progress. The indicator changes from red to green when fully charged. Attach onto a ProClip Mounting Platform.


Also Suitable for:
For EF Johnson 5100 ES-series in all countries.
For EF Johnson 5300 ES-series in all countries.


Installation Instructions

Charging Specifications:
Battery Chemistry. NiCD or NiMH batteries and Li-ion or Li-Poly batteries
Input Voltage: 11-30 V
Output Voltage: Ni-based: 7.5 V, Lithium-based: 8.4V.
Timer for Max. Charging Time: Ni-based: Yes, Lithium-based: Automatic, stops at 8.4 V.
Max. Charging Time: 2-3 hours depending on battery capacity
Rapid Charge: 1 ,6A +/- 5%
Trickle Charge: Ni-based: 6 mA, Lithium-based: 0 to 50 mA
LED Power Indicator: LED Green power indicator
Temperature Control: Ni-based: NTC-resistor in battery required, Lithium-based: Controlled by battery
Operating Temperature: -40 to 50 C (can be restricted by battery chemistry)
RoHS Compliant: Yes
Input Transient Protected: Withstands +150V & -450V. A 2,5A fuse is mounted on the incoming supply.
Output Short Circuit Protected: The charger will supply a maximum current of 1,6 A which protects both the charger and the connected equipment. The current limit is set to standards of the producer and shall not be higher.

Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug