skip to main content

Brodit 2 part solution

Home > Car Phone Holder > Cassidian > TH1n > Holders > Active holder with cig-plug

Active holder with cig-plug view larger image

Active holder with cig-plug for Cassidian TH1n

With tilt swivel.

For Cassidian TH1n in all countries. (Item # 530806)

Brodit special order product, please contact us for details.

The active holder charges your device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform in your car.


Also Suitable for:
For Airbus TH1n in all countries.
For Cassidian TH1n in all countries.


Installation Instructions

Please read all of the instructions and  look at the pictures before attaching the holder.
 
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
 
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.
 
3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the holder is firmly in place, but still can be adjusted.
 
4. The holder is in place.

Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug