skip to main content

Find your Brodit

Home > Brodit Step 1 > BlackBerry > Curve 9380 > Holders > Passive holder with tilt swivel

Passive holder with tilt swivel view larger image

Passive holder with tilt swivel for BlackBerry Curve 9380

For BlackBerry Curve 9380 in all countries. (Item # 511295)

Brodit special order product, please contact us for details.

When keeping your BlackBerry in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.


Also Suitable for:
For BlackBerry Curve 9380 in all countries.


Installation Instructions

Please, carefully read all instructions and review the pictures before attaching the holder.

1. Unscrew the screw in the center of the holder. Remove the holder from the tilt swivel base plate.

2. Place the base plate onto the desired position. Screw the base plate into place by using the enclosed screws.

3. Start to thread the center screw into the base plate. When you connect with the nut, pull the holder towards you to prevent the nut from spinning around. Tighten the screw firmly. Then loosen the screw sligthly for easier angling/rotation of the holder.

4. The holder is in place. Slide the device into the holder. To remove the device from the holder, slide it out. Use the tilt swivel to adjust the angle, or rotate the holder into a horizontal/landscape position if desired.

Passive holder with tilt swivel Passive holder with tilt swivel Passive holder with tilt swivel Passive holder with tilt swivel